Wheel and engine cleaner
Rim and engine cleaner water-based
RIMCLNR-MOTOR-GREEN-5LTR
Register now and access more than 125,000 products
Features:
- High cleaning power.
- High penetration power in hard-to-reach places.
- Non-aggressive, water-based product.
- Mixture of surfactants in alkaline medium without caustic soda.
Advantages:
- Removes oils, greases and brake dust easily.
- Cleans the dirt in hard-to-reach places.
- Does not attack plastics or rubbers.
- Does not contain caustic soda.
- It is not aggressive to the user and is not acidic.
All the data indicated in this document, as well as the recommendations made, are supported by numerous laboratory studies and validated by our extensive experience. However, taking into account the wide variety of materials on the market, as well as product application techniques that cannot be controlled by us, we always recommend carrying out preliminary tests with the materials and technique you intend to use. For these reasons, any use of the product is at the sole risk of the user and Würth Chile cannot be held liable for any loss or damage directly or indirectly resulting from application.
Datasheets(X)
Recommended for the pre-wash process to make the final wash easier and offer a great finish. Suitable for cleaning hard-to-reach places such as wheel arches, wheels, engines, chassis, brake system etc. Removal of oils, greases and soot from the brake system.
The engine must be cold and the car must be turned off. Apply the pure product on the surface. Leave the product to work for 30 seconds, without letting it dry. Remove with a jet of high-pressure water. If necessary, repeat the operation. The engine must be cold and the car must be turned off. Apply the pure product on the surface. Leave the product to work for 30 seconds, without letting it dry. Remove with a jet of high-pressure water. If necessary, repeat the operation.
Contents | 5 l |
Weight of content | 5 kg |
Container | Canister |
Chemical basis | Phosphate |
Smell/fragrance | Characteristic |
Colour | Green fluorescent |
pH value / conditions | 10 / 1% solution |
Density/conditions | 1.01 g/ml / at 25°C |
Shelf life from production | 24 Month |
Free of phosphoric acid | 0 - not applicable |