Pipe sealant ANAEROBIC
Pipe sealant FL 577
PIPSEAL-577-YELLOW-50G
Register now and access more than 125,000 products
Designed for the locking and sealing of metal threaded pipes and fittings
Appereance: Yellow Paste
Particularly suitable for use on stainless steel without surface activation
Reduces the migration of liquid product after application to the substrate
Offers gap performance to 0.25mm,
Provides robust curing performance
Oil and other contamination tolerance
- These instructions are only recommendations, which are based on our experience. We advise preliminary testing before use.
- Not for drink water
Datasheets(X)
- Applicable to most metals
- Locking and sealing of metal threaded pipes
- Use on stainless steel without surface activation
- Both surfaces must be smooth, clean, dry and free of oil, grease, etc.
- Apply a bead of product to the leading threads of the male fitting, leaving the first thread free. Force the material into the threads to thoroughly fill the voids. For bigger threads and voids, adjust product amount accordingly and apply a bead of product on the female threads also.
- Using compliant practices, assemble and wrench tighten fittings in accordance with manufacturers recommendations.
Weight of content | 50 g |
Chemical basis | Dimethacrylic acid ester |
Fully hardening/curing conditions | 23°C and 50% relative humidity |
Colour | Yellow |
Density/conditions | 1.1 g/cm³ / at 23°C, 50% relative humidity |
Max. gap-filling ability | 0.25 mm |
Min./max. initial strength | 5-10 min |
Min./max. functional strength | 24-24 h |
Max. final strength | 24 h |
Min./max. processing temperature | 5 to 40 °C |
Min./max. temperature resistance | -50 to 135 °C |
Min./max. breakaway torque | 12-14 Nm |
Breakaway torque conditions | M10 mm |
Min. prevail torque | 8 Nm |
Conditions for prevail torque | M10 |
Min./max. compressive shearing strength /conditions | 12.9-15.3 MPa / in accordance with DIN 54452 |
Shelf life from production/conditions | 24 Month / at 23°C and 50% relative humidity |