Epoxy adhesive
Epoxy resin, fast-acting adhesive metal
ADH-EPXYRSN-HISHORE-WHITE/BLACK-25G
Register now and access more than 125,000 products
Fast curing
High final strength
Following curing, further machining by lathing, milling, drilling, filing and speed cutting is easily possible
Broad range of applications
Connects a wide variety of surfaces. Steel, galv. steel, stainless steel, aluminum, copper, brass, sanded FRP, ABS, hard PVC, SMC, glass, ceramic
These instructions are only recommendations, which are based on our experience. We advise preliminary testing before use.
For repairing of broken-off plastic and metal parts. Widely used for bonding in automotive, fix-working and repair industry.
- Surface must be clean, dry and free from grease and old glue. Mask smooth surface to simplify clean up. Apply to one surface only.
- Gun out the adhesive on to the plate, exclude the first 2g product. Wipe off excess adhesive and do not apply undue strain to bond for 30 minutes.
- Assemble parts and hold together with pressure for 15 seconds or until set. The bond should be allowed to develop full strength before subjecting to any service load.
- Excessive uncured adhesive can be cleaned up with ketone type solvents.
Chemical basis | Epoxy |
Colour | Dark grey |
Min. processing time | 4 min |
Min. open time | 6 min |
Conditions for open time | at 23°C and 50% humidity |
Min. final strength | 1 d |
Processing temperature | 5 °C |
Shelf life from production/conditions | 24 Month / at 20°C and 50% relative humidity |
Weight of content | 25 g |
Product weight (per item) | 25 g |
Contents | 23 ml |
Container | Tube |
Viscosity | 17000 mPas |