ECO diamond cutting disc for asphalt, 350 mm
Diamond cutting disc ECONOMIC H10 for asphalt
CUTDISC-DIA-ASPHALT-ECO-H10-BR25,4-D350
Art.-no. 0668271352
EAN 4061975958273
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Diamond cutting disc for asphalt, made of high-strength steel that has been hardened, polished and calibrated. Laser welding provides increased safety and better performance. Suitable for use on asphalt cutting machines.
- Laser welding for increased strength and safety.
- Rapid cutting.
- Good stability during cutting.
- Protective segments: One special segment every six standard segments to improve the performance of all segments, ensuring improved disc stability and performance during cutting.
- Suitable for use in cutting machines.
- Special design with protective segments for improved disc performance.
Notice
- Never exceed the maximum rotation speed indicated on the disc label.
- Do not make curved cuts. This deforms the disc, resulting in breakage of the segments, which can cause serious injury.
- Do not exert excessive pressure on the disc during cutting. The weight of the machine is sufficient.
- Do not use the disc without the machine guard.
- Always inspect the disc before use (if there are cracks or breakages, discard the disc and replace with a new one).
- Do not use the disc for roughing materials.
Product information
Datasheets(X)
Application area
- Cutting asphalt.
- NOT suitable for cutting concrete.
Instructions
- Cutting should be carried out using the weight of the machine only, without the user exerting extra pressure.
- Always install the disc so that the direction of rotation indicated by the label on the disc corresponds to that of the machine.
- Maintain the exact inclination of the disc during cutting, avoiding oscillations and sideways movements of the machine.
Diameter (Ø) | 350 mm |
Bore hole | 25.4 mm |
Segment height | 10 mm |
Segment thickness | 3.2 mm |
Number of segments | 21 PCS |
Max. circumferential speed | 4200 m/min |
EN standard | 13236 |