Abrasive fleece matting body For impressive surfaces, cleaning oxide coatings and removing discolouration
Sanding fleece matting body
MATBDY-FLC-G100-40X20X6MM
Art.-no.
0672954210
EAN 4011231553773
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
For effective surfaces, cleaning oxide coatings and removing discolouration.
Notice
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient chip removal, do not increase the contact pressure. Instead, use coarser grains
Product information
Datasheets(X)
Diameter x width x shaft diameter | 40 x 20 x 6 mm |
Max. rotation speed | 15000 1/min |
Max. recommended rotation speed | 7500 1/min |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood |